Mounting frame for small MCP, red and white

704967 | Mounting frame for small MCP, red and white

The mounting frame is useful for mounting MCPs on different international flush mount boxes.

The frames are also suitable for IQ8Wireless interface Part No. 805601.10/805602.10.

Part-No.:
704967

Features

  • Radiocommunication transmission features
  • Interference-proof transmission via dual band with frequency hopping @ 433 MHz and 868 MHz
  • Bi-directional data traffic
  • Permanent automatic interference monitoring of transmission path
  • In case of interferences, automatic modification of frequency band and radiocommunication channel
  • Band blocking detection
  • High transmission range (in the open air: max. 300 m)
  • Automatic interference detection due to low field strength levels

Technical Data

Common technical data: 
Leistungserklärung 
Rated voltage 
V AC
Rated frequency 
Rated current 
Output current 
Battery capacity 
Operating voltage 
 
Operating voltage 
V DC
Operating voltage 
Quiescent current 
Lichtquelle 
Leuchtfarbe 
 
Quiescent current @ 9 V DC 
μA
Quiescent current @ 12 V DC 
Quiescent current @ 19 V DC 
μA
Quiescent current @ 24 V DC 
Quiescent current @ FACP battery 
Quiescent current @ FACP battery 
Quiescent current 
μA
Current consumption 
Current consumption 
Current consumption @ 12 V DC 
Current consumption @ 24 V DC 
Starting current 
mA
Current consumption in the case of failure 
mA
Current consumption testmode 
mA
Alarm current 
Alarm current 
Alarm current @ 9 V DC 
mA
Alarm current @ 12 V DC 
Alarm current @ 24 V DC 
mA
Alarm current @ 24 V DC 
Alarm current w/o communication curtain 
mA
Power consumption 
Current consumption for ext. devices 
A
Testing capacity 
Battery charging 
Heat detector response threshold 
Load factor 
Contact load relay 
Contact load 
Sound level 
dB
Sound level @ 12 V DC 
Sound level @ 24 V DC 
Sound level 
No. of detector/zone 
Circuit 
Display 
Operation indicator 
Alarm display 
Fault display 
Frequency of flash 
Lighting energy 
Flash color 
Luminous intensity 
 
 
Signal flashing lamp 
Range 
Connection terminal 
CO pre-alarm 
ppm
CO alarm 
ppm
Area to be monitored 
Height to be monitored 
Air velocity 
Sensitivity 
Application temperature 
Ambient temperature 
Storage temperature 
Air humidity 
Air humidity 
Type of protection 
 
Protection class 
Ex. protection 
Category 
Housing 
Material 
 
Installation 
Signal Range 
Mounting height wall 
Room width 
Category ceiling 
Mounting height ceiling 
Room diameter 
Color 
red, similar to RAL 3020
 
white, similar to RAL 9010
Weight 
Weight 
Optisches_Signalbild 
Lebensdauer_optisch 
Drehfrequenz 
Abmessungen 
Content 
Cable length 
m
Maximum sensor length 
m
Detector specification 
DIBt approval 
Specification 
 
Cable diameter 
mm
Cable entry 
Maximum tube length 
Dimensions 
W: 132 mm H: 132 mm D: 8 mm
 
Length 
Declaration of Performance 
Konformität 

Additional information

Please take into account that the use of wireless components requires extra training, covering project planning and commissioning. For further information see our training brochure.

These devices were designed, produced and labeled for operation within the countries of the European Union (EU) in accordance with the current EU standards and requirements. In case the device is installed outside of the EU, national guidelines and requirements must be taken into consideration.

For further information, please contact your local sales representative.

Using components like IQ8Alarm Plus and IQ8Quad with integrated alarm devices the esserbus-PLus is needed.

Scope of delivery

2 x Fastening screws are included (red and white)

Downloads

Produktdatenblatt
Ausschreibungstext

Product Data Sheet

Version: 2024-03

Language:
English
Doc extension:
pdf