SEI serial essernet interface EDP, bidirectional

784856 | SEI serial essernet interface EDP, bidirectional

Same as 784855, but bidirectional with remote control options e.g. for the connection to a Building Management System (BMS)

Part-No.:
784856

Technical Data

Rated voltage 
V AC
Zertifizierung 
Leistungsaufnahme und DAS-Ausgang unter 48 V 
Leistungsaufnahme und DAS-Ausgang unter 24 V 
DAS Ausgangsspannung (nur positive Sicherheit) 
Eingang der Spannungsversorgung 
Spannungsfernbedienungseingang mit Spannungsemission 
Spannung_Fernbedienungseingang mit Stromunterbrechung 
Rated voltage 
Rated frequency 
Nominal frequency 
Hz
Rated current 
Operating voltage 
10,5 ... 28 V DC
Operating voltage 
V DC
Operating voltage 
Output voltage 
Rated current 
Output voltage 
Output current 
Output current 
Quiescent current 
 
Quiescent current @ 12 V DC 
Current consumption 
Current consumption 
Current consumption @ 12 V DC 
approx. 60 mA
Current consumption @ 24 V DC 
Alarm current @ 12 V DC 
Current consumption for ext. devices 
A
Belastbarkeit pro Ausgang 
Power consumption 
W
Battery 
Battery capacity 
 
Resolution 
Contact load relay 
Contact load 
Connection terminal 
Holding power 
N
Cable entry 
Application temperature 
Ambient temperature 
-5 °C ... 50 °C
Storage temperature 
-10 °C ... 50 °C
Ambient conditions 
Air humidity 
Air humidity 
< 95 %
Type of protection 
Housing 
Material 
Color 
 
Color front plate 
Height 
Weight 
Weight 
 
FO-Connector 
Cable length 
m
Cable 
Dimensions 
 
 
Declaration of Performance 
Specification 
Approval 

Accessories

788606 Housing kit

772386 Interface module RS 232/24 V

772387 Interface module TTY/CL 20 mA

784840.10 essernet micromodule (62.5 kBd)

784841.10 essernet micromodule (500 kBd)

Additional information

The essernet micromodule and the interface module either RS 232 (Part No. 772386) or TTY (Part No. 772387) are not included and must be ordered separately in accordance with the required essernet type and the serial transmission standard. The optional interface module must be ordered separately and is a supplement to the serial essernet interface. It is plugged into the connectors provided on the main PCB. Depending on the required application, a TTY /CL 20 mA (Part No. 772387) or a RS232 / V.24 (Part No. 772386) interface module may be installed on the serial essernet interface.

When using virtual control groups (PA/VA), a hardware output shall be provided on the FACP side per virtual control group, e.g. through the output of an esserbus coupler.To avoid any kind of problem, please contact the International Sales Support for advice before quoting or installing the serial essernet interface!

Downloads

Produktdatenblatt
Ausschreibungstext

Product Data Sheet

Version: 2024-03

Language:
English
Doc extension:
pdf