Features
- Two multimode fibers required per network section
- Glass fibre G50 / 125 μm: attenuation max. 10 dB, distance up to 4000 m
- Glass fibre G62.5 / 125 μm: attenuation max. 10 dB, distance up to 4000 m
Multimode FO converter ST
Depending on the fiber used, distances of up to 4 km are possible. Suitable for multimode fibres G50/125 μm and G62,5/125 μm.
- Part-No.:
- 784768
Technical Data
- Operating voltage
- 9,5 ... 48 V DC
- Contact Ausgänge
- Contact Current
- Sensoren pro Hub
- Sensoren pro Controller
- Hubs pro Controller
- Angesaugte Lufttemperatur
- Länge der Abzweigleitung
- Lineare Rohrlänge
- Ansaugöffnungen
- Operation temperature
- Anzahl_der_Relaisausgänge
- Indication Output voltage
- Nominal frequency
- Hz
- Rated voltage
- Operating voltage
- V DC
- Operating voltage
- Voltage supply
- Quiescent current
- Quiescent current @ 9 V DC
- Quiescent current @ 12 V DC
- Quiescent current @ 19 V DC
- Quiescent current @ 24 V DC
- Ruhestrom @ 28 V DC_comp
- Quiescent current @ FACP battery
- Quiescent current @ FACP battery
- Current consumption
- Alarmstrom @ 28 V DC_comp
- Current consumption @ 12 V DC
- approx. 140 mA
- Current consumption @ 24 V DC
- approx. 75 mA
- Current consumption
- Power consumption @ 5 V DC
- Power consumption @ 12 V DC
- Power consumption @ 24 V DC
- Alarm current @ 9 V DC
- Alarm current @ 12 V DC
- Alarm current @ 24 V DC
- Starting current @ 24 V DC
- Starting current
- Current consumption in the case of failure
- Output current
- A
- Power consumption
- Current consumption for ext. devices
- A
- Battery capacity
- Contact load
- Contact load relay
- Sensitivity
- Sound level
- Sound level @ 24 V DC
- Display
- Frequency of flash
- Hz
- Lighting energy
- Range
- Connection terminal
- Maximum tube length
- Area to be monitored
- Height to be monitored
- Alignment angle
- Unempfindlichkeit gegenüber Gebäudebewegungen
- Air velocity
- Application temperature
- Response temperature
- Ambient temperature
- -10 °C ... 60 °C
- Storage temperature
- -20 °C ... 75 °C
- Wavelength
- 850 nm
- Connection
- ST
- Sampled Air Temperature
- Air humidity
- Air humidity
- Ex-category
- Ex. protection
- Type of protection
- IP 20
- Housing
- Aluminium unpainted
- Type
- Material
- Color
- Weight
- approx. 320 g
- Weight
- Luftfeuchtigkeit
- Cable length
- m
- Maximum sensor length
- m
- Rückseitige Bodenplatte
- mm
- Detector specification
- EC-type examination certificate
- Specification
- Dimensions
- W: 67 mm H: 100 mm D: 22 mm
- W:90 mm H: 100 mm D: 22 mm (incl. mounting eye)
- Declaration of Performance
- Approval
Additional information
The power supply of the fibre optic converter must be provided by the FACP. On both sides of a fibre optic line, fibre optic converters of the same type must always be used.
Scope of delivery
1x DIN rail mounting kit
1x connecting cable max. 1,8 m converter - essernet®-module
Downloads
