Detector base with relay contact for IQ8Quad

805591 | Detector base with relay contact for IQ8Quad

IQ8Quad detector base with relay contact output. Contact: floating NO or NC contact selectable via jumper. Settings on site: NO contact.

Part-No.:
805591

Features

  • Provides a voltage-free contact controlled by the remote output of a detector
  • Draws negligible current
  • A lot of space for wire connection
  • Automatic closing of the loop bus wiring system for detector extraction
  • Detector extraction locking is enclosed in the base

Technical Data

Common technical data: 
Leistungserklärung 
Rated voltage 
V AC
Rated frequency 
Rated current 
Output current 
Battery capacity 
Operating voltage 
 
Operating voltage 
V DC
Operating voltage 
Quiescent current 
Betriebsspannung (EN 54-17) 
Betriebsspannung Selbsttest 
Lichtquelle 
Leuchtfarbe 
Luftgeschwindigkeit 
Lüfterlautstärke 
Ruhestrom @ BMZAkku 
Anwendungstemperatur Selbsttest 
 
Quiescent current @ 9 V DC 
μA
Quiescent current @ 12 V DC 
Quiescent current @ 19 V DC 
μA
Quiescent current @ 24 V DC 
Quiescent current @ FACP battery 
Quiescent current @ FACP battery 
Quiescent current 
μA
Current consumption 
5 µA (w/o detector, active relay)
Current consumption 
Current consumption @ 12 V DC 
Current consumption @ 24 V DC 
Starting current 
mA
Current consumption in the case of failure 
mA
Current consumption testmode 
mA
Alarm current 
Alarm current 
Alarm current @ 9 V DC 
mA
Alarm current @ 12 V DC 
Alarm current @ 24 V DC 
mA
Alarm current @ 24 V DC 
Alarm current w/o communication curtain 
mA
Power consumption 
Current consumption for ext. devices 
A
Testing capacity 
Battery charging 
Heat detector response threshold 
Load factor 
Contact load relay 
30 V DC/1 A
Contact load 
Sound level @ 12 V DC 
Sound level @ 24 V DC 
Sound level 
No. of detector/zone 
Circuit 
Display 
Operation indicator 
Alarm display 
Fault display 
Frequency of flash 
Lighting energy 
Flash color 
Luminous intensity 
 
 
Signal flashing lamp 
Range 
Connection terminal 
Ø 0.6 mm to 2 mm²
CO pre-alarm 
ppm
CO alarm 
ppm
Area to be monitored 
Height to be monitored 
Air velocity 
Sensitivity 
Application temperature 
-20 °C ... 72 °C
Ambient temperature 
Storage temperature 
-25 °C ... 75 °C
Air humidity 
< 95 % (non-condensing)
Air humidity 
Type of protection 
 
Protection class 
Ex. protection 
Category 
Housing 
Material 
ABS
 
Installation 
Signal Range 
Mounting height wall 
Room width 
Category ceiling 
Mounting height ceiling 
Room diameter 
Color 
white, similar to RAL 9010
 
Weight 
approx. 80 g
Weight 
Optisches_Signalbild 
Lebensdauer_optisch 
Drehfrequenz 
Abmessungen 
Content 
Cable length 
m
Maximum sensor length 
m
Detector specification 
DIBt approval 
Specification 
 
Cable diameter 
mm
Cable entry 
Maximum tube length 
Dimensions 
Ø: 117 mm H: 24 mm (incl. detector 62 mm)
 
Length 
Declaration of Performance 
Konformität 

Additional information

Cable entry on the side or through the bottom plate. Connection of remote indicators not allowed!

Wago clamps for looping in wires, e.g. type 243-204 (Ø 0.5 mm - 1.0 mm) or 273-104 (0.75 mm²- 2.5 mm²) can be mounted on the detector base.

Not suitable for application with IQ8Quad with integrated alarm device Part No. 802383, 802384, 802385 and 802386 as well as 802385.SVxx and 802386.SVxx!

Product Data Sheet

Version: 2025-11

Language:
English
Doc extension:
pdf