Features
- Ease of installation and a lot of space for wire connection
- Slide-easy base and elegant design with automatic closing of the loop bus wiring system for detector extraction
- Detector extraction locking is enclosed in the base
- One-way only fit
Standard detector base for IQ8Quad and ES Detect
- Part-No.:
- 805590
Technical Data
- Common technical data:
- Leistungserklärung
- Rated voltage
- V AC
- Rated frequency
- Rated current
- Output current
- Battery capacity
- Operating voltage
- Operating voltage
- V DC
- Operating voltage
- Quiescent current
- Betriebsspannung (EN 54-17)
- Betriebsspannung Selbsttest
- Lichtquelle
- Leuchtfarbe
- Luftgeschwindigkeit
- Lüfterlautstärke
- Ruhestrom @ BMZAkku
- Anwendungstemperatur Selbsttest
- Quiescent current @ 9 V DC
- μA
- Quiescent current @ 12 V DC
- Quiescent current @ 19 V DC
- μA
- Quiescent current @ 24 V DC
- Quiescent current @ FACP battery
- Quiescent current @ FACP battery
- Quiescent current
- μA
- Current consumption
- Current consumption
- Current consumption @ 12 V DC
- Current consumption @ 24 V DC
- Starting current
- mA
- Current consumption in the case of failure
- mA
- Current consumption testmode
- mA
- Alarm current
- Alarm current
- Alarm current @ 9 V DC
- mA
- Alarm current @ 12 V DC
- Alarm current @ 24 V DC
- mA
- Alarm current @ 24 V DC
- Alarm current w/o communication curtain
- mA
- Power consumption
- Current consumption for ext. devices
- A
- Testing capacity
- Battery charging
- Heat detector response threshold
- Load factor
- Contact load relay
- Contact load
- Sound level @ 12 V DC
- Sound level @ 24 V DC
- Sound level
- No. of detector/zone
- Circuit
- Display
- Operation indicator
- Alarm display
- Fault display
- Frequency of flash
- Lighting energy
- Flash color
- Luminous intensity
- Signal flashing lamp
- Range
- Connection terminal
- Ø 0.6 mm to 2 mm²
- CO pre-alarm
- ppm
- CO alarm
- ppm
- Area to be monitored
- Height to be monitored
- Air velocity
- Sensitivity
- Application temperature
- -20 °C ... 72 °C
- Ambient temperature
- Storage temperature
- -25 °C ... 75 °C
- Air humidity
- Air humidity
- Type of protection
- Protection class
- Ex. protection
- Category
- Housing
- Material
- ABS
- Installation
- Signal Range
- Mounting height wall
- Room width
- Category ceiling
- Mounting height ceiling
- Room diameter
- Color
- white, similar to RAL 9010
- Weight
- approx. 60 g
- Weight
- Optisches_Signalbild
- Lebensdauer_optisch
- Drehfrequenz
- Abmessungen
- Content
- Cable length
- m
- Maximum sensor length
- m
- Detector specification
- DIBt approval
- Specification
- Cable diameter
- mm
- Cable entry
- Maximum tube length
- Dimensions
- Ø: 117 mm H: 24 mm (incl. detector 62 mm)
- Length
- Declaration of Performance
- Konformität
Additional information
Cable entry on the side or through the bottom plate.
Wago clamps for looping in wires, e.g. type 243-204 (Ø 0.5 mm - Ø 1.0 mm) or 273-104 (0.75 mm² - 2.5 mm²) can be mounted on the detector base.
Please contact your local sales representative for varnished detectors & bases and remote indicators!
Downloads
D800024_D_Produktinformation
Version: 04.2014
- Language:
- German
- Part No.:
- D800024
- Doc extension:
- File Size:
Product data sheet ES Detect
- Language:
- English
- Part No.:
- D800024.G0
- Doc extension:
- File Size:
- 288 kB
Brochure Ex Products
Version: 05.2016
- Language:
- English
- Part No.:
- 797352.G0
- Doc extension:
- File Size:
- 1681 kB